Printer Errors

From Digi Wiki
Jump to: navigation, search

Epson

4000 Errors

00010004 CR Motor encoder check error
00010005 CR Motor out of step
00010006 CR Motor over current
00010007 CR Motor in-position time-out
0001000A CR axis detection error
0001000F CR Motor PWM output faulty
0001001D CR servo parameter error

4800 Errors

COMMAND ERROR
FORBIDDEN MEDIA
INK LOW
INK OUT
LOAD PAPER
LOAD ROLL PAPER
MNT REQ #
MNT TNK NEAR FULL
MNT TNK FULL
MOT STRAIGHT RELOAD
NOZZLES STILL CLOGGED
PAPER JAM
PAPER NOT STRAIGHT
PAPER OUT
RELOAD PAPER
RELOAD PAPER INSERT MORE DEEPLY
REMOVE PAPER
SET PAPER LEVER
TOP COVER OPEN
UNABLE TO PRINT
WRONG SIZE PAPER

4880 Errors

7600 Errors

  • Maintenance Required code 0040 - The printer is alerting that certain parts need to be replaced (assembly cap, drain assembly, and head wiper). The printer automatically displays this alert at 5000 prints. If these parts are inspected and deemed still usable, then this is the process to clear the alert (NOTE: this involves clearing the cleaning count, so you will have to make sure to pay attention to these parts after you clear this).
    • Turn printer off
    • Hold 'Paper Source' 'Down Arrow', and 'cut/eject' all at the same time and turn printer on. Release the buttons when the printer has text on the screen.
    • Push the down button to get to 'Counters'
    • Push right arrow to select 'clear counter' option
    • Push the down button to get to 'Cleaner'
    • Push the right arrow to select 'Cleaner'
    • Push the 'Enter' button to clear the Cleaner count.
    • Restart power on the printer normally.

7800 Errors

7880 Errors

9800 Errors

9880 Errors

HP

5200 Errors

5550 Errors

  • 10.00.01 - Replace toner cartridge to fix, according to fixya.com may also be a DC controller issue.
  • Supplies Error
  • 8#.0180. - JetDirect Card error. Power cycle the printer to clear the error. If power-cycling does not clear the error, the JetDirect Card will need to be replaced. The # corresponds with the EIO slot the JetDirect card is plugged into.
    • 81.0180 EIO 1 Error
    • 82.0180 EIO 2 Error
    • 83.0180 EIO 3 Error
  • Card Slot Not Initialized
    • Internal CF Card needs to be reinitialized
    • Initialize Card Slot
      • Turn Off Printer
      • Turn Printer On
      • When Memory Count is displayed, press and hold the MENU button
      • When all 3 lights under MENU button are on and steady, release the MENU button
      • Press and release the <- button
      • When INITIALIZE DISKS is displayed on screen, press and release GREEN CHECK button
  • ERROR: limitcheck OFFENDING COMMAND: image STACK:
    • User is printing an image with physical dimensions larger than the printer can handle. Try reducing the physical dimensions of the image to match the physical dimensions of the paper.
      • ~8x10 on Letter sized paper
      • ~10x16 on Tabloid

8150 Errors

4600 Errors

4100 Errors