Print from Lightroom to the Epson Printers

From Digi Wiki
Jump to: navigation, search
  • Click on the ‘Print’ module - fig.1
fig.1

  • Expand the 'Print Job' section - fig.2
fig.2

  • Select 'Printer' in the 'Print to' menu - fig.3
fig.3

  • Uncheck ‘Draft Mode Printing’ - fig.4
fig.4

  • Check ‘Print Resolution: 300 ppi' (usually the standard) - fig.5
fig.5

  • Uncheck ‘Print Sharpening' - fig.6
fig.6

  • Uncheck ‘16 Bit Output’ - fig.7
fig.7

  • Expand the 'Color Management' section - fig.8
fig.8

  • Profile: Select ‘Other’ - fig.9
fig.9

  • Choose paper profile in the window ('Include Display Profiles' should be left unchecked) - fig.10
fig.10

  • Rendering Intent: Relative - fig.11
fig.11

  • Click ‘Print’ - This will bring up the printer driver dialogue - fig.12
fig.12

  • Switch from ‘Layout’ to ‘Printer Settings’ - fig.13
fig.13

  • Page Setup: Choose roll or sheet and select source (tray or manual feed) - fig.14
fig.14

  • Set Media (Paper) Type - fig.15
fig.15

  • Print Mode: ‘AccuPhoto HD’ - fig.16
fig.16

  • Color Mode: ‘Off (No Color Management)’ - fig.17
fig.17

  • Output Resolution: SuperPhoto - 1440 dpi - fig.18
fig.18

  • Uncheck ‘High Speed’
  • Check ‘Finest Detail' - fig.19
fig.19

  • Click ‘Print’ - This will send your image to the printer - fig.20
fig.20