Print from InDesign to the Epson Printers

From Digi Wiki
Jump to: navigation, search
  • File -> Print (cmd+p) - fig.1
fig.1
  • Click 'Printer' Button, expand menu if necessary (continue through warning - this is just letting you know you are leaving the software printer dialogue) - fig.2
fig.2

  • Change menu from 'Layout' to 'Printer Settings' - fig.3
fig.3

  • Choose Paper Type (roll or sheet) - fig.4
fig.4

  • Choose Paper Source. If sheet, choose tray or manual feed - fig.5
fig.5

  • Choose Media (Paper) Type - fig.6
fig.6

  • Print Mode should be 'AccuPhoto HD' - fig.7
fig.7

  • Color Mode should be 'Off (No Color Management)' - fig.8
fig.8

  • Output Resolution should be SuperPhoto 1440 (Draft 360 dpi is adequate for proof prints) - fig.9
fig.9

  • Proof vs Final Printing

  • Proof Printing - fig.10
  • Check 'High Speed'
  • Uncheck 'Finest Detail'
fig.10

  • Final Printing - fig.11
  • Uncheck 'High Speed'
  • Check 'Finest Detail'
fig.11

  • Click 'Print' - This will bring you back to the software print menu - fig.12
fig.12

  • Click ‘Page Setup’ Button - fig.13
fig.13

  • Click ‘Continue’ on the error stating you are leaving the software dialogue - fig.14
fig.14

  • Format For - Select the printer you are using - fig.15
fig.15

  • Paper Size - Select paper size and type (sheet vs roll) - fig.16
fig.16

  • Click ‘OK’ - fig.17
fig.17

  • Select the ‘Color Management’ tab - fig.18
fig.18

  • Color Handling - Set to ‘Let Illustrator Determine Colors’ - fig.19
fig.19

  • Printer Profile - Set to paper profile - fig. 20
  • ex. - Pro4880 EMP_PK for Enhanced Matte on the Epson 4880 with Photo Black inks.
fig.20

  • Click ‘Print’ to send your print to the printer - fig.21
fig.21